Best 22 Hadco Lightings 2019

 

Hadco Lighting Ig3h Ig3h Rock Guard With Lens For Il336 Well Light 120v Fiberglass Reinforrced Polyester Composite - 120v. Fiberglass reinforrced polyester composite rockguard with tempered clear glass lens fasteners are stainless steel accessory attaches with set screws to the top of the il336-al and il336-a inground fixtures 6″ (152mm) dia x 1 11/16″ (43mm) tall.

 

Hadco Lighting SRL4_H SRL4 Low Voltage Decklyte Bronze - The srl4 decklyte is capable of harnessing the superior qualities of xenon bulbs and can support a xenon bulb of up to 10 watts, which is equivalent to about 40 watts of conventional lighting power. 30 lbs. ) And is capable of operating in wet conditions. Hadco lighting takes care to see that all the components of the srl4 deck light are manufactured in-house, thereby conforming to its international quality standards. The deck light is extremely light in weight (about 0. The finish is obtained through an electrostatically applied thermoset polyester powder coat, which makes the coating durable and weather resistant. The srl4 low voltage decklyte from hadco lighting is a low voltage outdoor deck light housed in die cast aluminium in black and bronze finishes.

 

Hadco Lighting Rll1-a Rec Louver Steplyte, Black - Lamp is included with fixture. Height 2 13/16″ (71mm) width 4 5/8″ (116mm) depth 2 3/4″ (70mm) max. Optical assembly frosted tempered glass lens. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Certifications manufactured to iso 90012008 standards. 12 volt system requires remote transformer, not included. Laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications. 12 volt fixture is pre-wired with 6-ft. Gasketing is diecut neoprene. Lamping 12w maximum s-8 (93) lamp. Warranty three-year limited warranty. 2 lb. Electrical assembly single contact bayonet (s-8). Housing die-cast aluminum faceplate with galvanized steel, single gang recessed box with stainless steel fasteners. Weight 1. Pigtail of 18-2 awg, 105° c, spt-1w wire.

 

Hadco Lighting B1-a B1 Small Aluminum Bullyte Black Without Shroud 100w Par/r20 - Black without shroud. 100w par/r20.

 

Hadco Lighting DWCL1_A DWCL1-A Composite Mini Beacon Black 12V 12V - Cetl listed to canadian safety standards for wet locations. Weight 2. Lower wattage lamps are acceptable. S. Optical assembly frosted borosilicate glass. Note watertight connectors and potting compound (by others) must be used to maintain a watertight seal at conduit entry points. Safety standards for wet locations. Finish composite is textured, pressure formed, molded-in-color. 5 lb. Warranty ten-year limited warranty. Electrical assembly bi-pin socket type (g4) with 250°c high temperature teflon coated wire leads. Manufactured to iso 90012008 standards.  Housing single-piece compression molded fiberglass reinforced polyester composite, factory pressure tested to ensure water will not wick or leak through. Height 8 3/4″ (222mm) width 5″ (127mm) max. 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105° c, spt-1w wire. Lamping 20w maximum t3 bi-pin lamp. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Certifications etl listed to u. Lamp is included with fixture. Two (2) conduit inlets at bottom. 12 volt system requires remote transformer, not included. Fasteners are 300 series stainless steel. Single-piece molded silicone gasket to prevent water, dust, and insect filtration.

 

Hadco Lighting Landscape Light Bun4-As Large Composite Bullyte With Short Shroud Narrow Reflector B - Line voltage, large composite bullyte, fully-rotatable shroud, fully-adjustable swivel arm with vibration-proof locking teeth, lamp type par30/r30 or par38/r40 (not included)socket base bi-pin, width 6 1/4″length 16 1/2″narrow reflector, finish composite black.

 

Hadco Lighting MUL4_GS7 MUL4 Small Mushroom Pathlyte Low Voltage Verde Green - Frosted tempered glass lens. Bronze. Verde green. Etl listed to us safety standards for wet locations  cetl listed to canadian safety standards for wet locations  manufactured to iso 90012008 standards. 18w maximum s-8 (1141) lamp  lamp is included with fixture  lower wattage lamps are acceptable.

 

Hadco Lighting Iul516-h Iul516 Bronze Micro Inground Low Voltage Lamp Type Not Included - 12v iul516 composite in-ground lightlamp type mr16socket base bi-pinrequires remote transformer (not included)finish brass.

 

Hadco Lighting B3-h B3 Aluminum Bullyte Line Voltage Accent Bronze 100w Par/r30 - Bronze. 100w par/r30.

 

Hadco Lighting P3_g P3-g Small Horizon Pathlyte Verde 120v 120v - Lamp is not included. Laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications. Lower wattage lamps are acceptable. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. 85 lb. Safety standards for wet locations. Lamping 75w maximum a19 lamp. Cetl listed to canadian safety standards for wet locations. Weight 2. Manufactured to iso 90012008 standards. Height 18 1/2″ (470mm) width 6″ (152mm) max. Housing die-cast aluminum. Stem is extruded aluminum, sold separately. S. Optical assembly painted, tempered glass jar with clear glass top. Certifications etl listed to u. Electrical assembly medium base phenolic socket with nickel-plated screw shell and center contact. Fixture is pre-wired with 18 awg black, white, and ground wires. Warranty three-year limited warranty. 1/2″ nps male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel.

 

Hadco Lighting Rl4 Large Horizon Pathlyte 12v, Stake Included - The rl4 large horizon pathlyte is a low voltage path lighting fixture from hadco lighting, consisting of a powder-coated, extruded aluminium stem and shade, covering a 20 watt bi-pin lamp. The stem is tested for weather- and fade-resistance. The intensity.

 

Hadco Lighting FUL1_GS7 FUL1-G Small Floral Pathlyte Verde 12V – Mounting Stake Included 12V - Â  Lamp is included with fixture.   Lower wattage lamps are acceptable. Lamping27w maximum s-8 (1156) lamp.  Housingsingle-piece cast aluminum.   12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105° c, spt-1w wire. Finishthermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.   1/2″ nps male threads to screw onto accessory mounting stake or junction box, sold separately. Weight2.   Manufactured to iso 90012008 standards. Height21 1/2″ (544mm)width8 1/4″ (209mm)max.   Stem is extruded aluminum, sold separately. Safety standards for wet locations.   Cetl listed to canadian safety standards for wet locations.   Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. 1 lb. Certificationsetl listed to u. S.   12 volt system requires remote transformer, not included. Electrical assemblysingle contact bayonet (s-8). Warrantythree-year limited warranty.   Laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications.

 

Hadco Lighting WAM1_H WAM1 Floodlyte standard Clear Lens 120V Bronze Clear Lens Clear Lens - Height 4 7/8″ (123mm) width 6 7/8″ (175mm) length 5″ (126mm) max. ” Nps male threads to screw onto accessory mounting stake or junction box, sold separately. Warranty three-year limited warranty. Manufactured to iso 90012008 standards.  Housing die-cast aluminum. Optical assembly clear tempered glass lens. Lamping 75w maximum t3 mini candelabra lamp. S. Certifications etl listed to u. Frosted tempered glass lens. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Electrical assembly mini-candelabra socket (e11). Gasketing is silicone. Fixture is pre-wired with 18 awg black, white, and ground wires. Cetl listed to canadian safety standards for wet locations. Safety standards for wet locations. Weight 1. Lamp is not included. Lower wattage lamps are acceptable. Fasteners are 300 series stainless steel. 75 lb. Fully-adjustable swivel arm with vibration-proof locking teeth.

 

Hadco Lighting Dsl2 H Square Surface Downlyte With Bracket Low Voltage; Bronze - Bronze. Etl listed to us safety standards for wet locations  cetl listed to canadian safety standards for wet locations  manufactured to iso 90012008 standards. 18w maximum s-8 (1141) lamp  lamp is included with fixture  lower wattage lamps are acceptable. Housing machined aluminum top cap and cast aluminum body with adjustable yoke. Frosted tempered glass lens.

 

Hadco Lighting 300 Watt Stainless Steel Multi-tap 12-15 Volt Transformer - The transformer is thermally protected on primary, and secondary side is protected by circuit breaker. Housing is 304 brushed stainless steel case with stainless steel screws and lockable captive door, hinged on side weather-proof compartment for plug-in time clock and photo cell. Lifetime limited warranty. 12, 13, 14, and 15 volt output taps for design flexibility and longer cable run capability. 6-ft heavy-duty 18-3 awg, 105° c, sjt power cord with 3 prong grounded wall plug.

 

Hadco Lighting CB100AK5812 CB100 Composite Bricklyte Black 12V 2 x 18W 1141 (Lamp Type Included) - The cb100 has die-cast aluminium box with a slight proportion of copper to prevent corrosion and enable it to function even in wet locations. Its electronic ballast can start up even in -20o fahrenheit (thataâ’‰”¢s 52o below zero) and the powder coating is durable and suited for concrete and masonry application. . Hadco from the house of philips brings its over five decade expertise in the lighting industry into play in the cb100 composite bricklyte. With a height of 90 mm and depth of 103 mm, the cb100 composite bricklyte can be set into brick and concrete structures and comes in a bronze finish.

 

Hadco Lighting TSS954_15 TSS954-15 – 900W Multitap Transformer 120V - Natural copper is bright polished, untreated copper color will age naturally to a fine dark copper patina. Color will age naturally to a fine dark copper patina. Shade only, stake and junction box sold seperately. Replacement shade for cul2d. Bronze.

 

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green - Verde green.

 

Hadco Lighting Rl4-as7 Rl4 Large Horizon Pathlyte 12v Black - The stem is tested for weather- and fade-resistance. With a height of 17 and a quarter inches, the rl4 large horizon pathlyte can be used from the curb or from a detached garage to the entrance, to provide illumination and safety and reduce the risk of stumbling in the dark. The rl4 large horizon pathlyte is a low voltage path lighting fixture from hadco lighting, consisting of a powder-coated, extruded aluminium stem and shade, covering a 20 watt bi-pin lamp. The intensity of attention to detail and safety can be seen in the fact that even the fasteners are made in stainless steel to withstand the rigors of the outdoors. The lens is made of spun aluminium and the fixture conforms to all building and regulatory and safety norms.

 

Hadco Lighting RSCL2AK5812 RSCL2 Low Voltage Louvered Steplytes Black - Safety standards for wet locations. 3% copper to resist corrosion. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Faceplates are color-impregnated. 86 lb. Ada compliant when used in indoor and outdoor wall applications. Optical assembly horizontal louver lens made of die-cast copper-free aluminum with a 45 cutoff and frosted tempered glass. Height 3 1/2″ (89mm) width 9″ (229mm) depth 4 11/16″ (103mm) housing height 2 11/16″ (68mm) housing width 8 1/8″ (207mm) max.  Housing aluminum parts have zinc-rich primer and thermoset powdercoat for durability. ). 12 volt system requires remote transformer, not included. Pigtail of 18-2 awg, 105 c, spt-1w wire. S. Zinc-rich primer and thermoset powdercoat for durability. (Note flange not included with cb100 fixture. Manufactured to iso 90012008 standards. Lamp is included with fixture. Electrical assembly single contact bayonet (s-8). Cast bronze louver is natural cast bronze with frosted tempered glass. Warranty three-year limited warranty. Cetl listed to canadian safety standards for wet locations. Die-cast aluminum back box contains less than 0. Die-cast aluminum trim contains less than 0. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Weight 3. 3% copper to prevent corrosion in concrete or masonry applications. 12 volt fixture is pre-wired with 6-ft. Certifications etl listed to u. Lamping two 18w maximum s-8 (1141) lamps (single contact bayonet base). Thermal protection device is required for installations in drywall, plaster, wood or other non-masonry materials.

 

Hadco Lighting BPL36-HS7 BPL36S7 12 Volt Non-Metalic Bullyte with Stake Bronze - Fully rotatable shroud, injection molded polyester resin. Safety standards for wet locations. Fasteners are 300 series stainless steel. Weight 1. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. 2 lb. 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105° c, spt-1w wire. Finish composite is textured, pressure formed, molded-in-color. Manufactured to iso 90012008 standards. 12 volt system requires remote transformer, not included. Electrical assembly double screw terminal socket. Fully-adjustable swivel arm with vibration-proof locking teeth”½” nps male threads to screw onto accessory mounting stake (included) or junction box (sold separately). Lamping 50w maximum par36 screw terminal lamp. Width 5 1/8″ (130mm) length 6 3/8″ (162mm) max. Certifications etl listed to u. Housing one-piece injection molded polyester resin. Warranty ten-year limited warranty. Cetl listed to canadian safety standards for wet locations. S. Lower wattage lamps are acceptable.

 

Hadco Lighting Waml1d Led Floodlyte Low Voltage - Color will age naturally to a fine dark copper patina. Replacement shade for cul2d. Bronze. Natural copper is bright polished, untreated copper color will age naturally to a fine dark copper patina. Shade only, stake and junction box sold seperately.