Subosi G108 6-led Garden Pool Aquarium Underwater Boat Lighting Perfectly Sealed Waterproof Ip68 Submersible Flood
- Ip68 waterproof rated, super waterproof and only designed to be used below the water line, please do not use this led underwater boat lamp when out of water. Low voltage for safe use, dc12v is totally safe for illumination in fountain, garden, pool(especially swimming pool), aquarium, pond, rock gardens, fish tank etc. Attention package included only a lamp, power supply is not included and this lamp just compatible with dc12v power supply, wattage at least 30w, please be caution to choose this one. The lamp body size diameter 4 inches(10cm), height 24 inches(6cm), cable length 65feet( or 2meters), lifespan long over 30000 hours. Equipped with 6 high power led as the lamp’s light source, which is ultra-bright as well as energy-efficient & environmental protection, can be applied as accent light.
42″ (H) x 13″ (W) Aluminum Handrail – For 8″ Steps/Stairs – Safety Grab Bar – Dock, Boat, Pool, Hot Tub, etc.
- This handrail is made by marine fiberglass direct and it uses two 3-1/2″ base plates that will fit on a 2×4 with no overlapping. 42″ aluminum handrail designed for steps. The 8″ cut off on one leg is perfect for stairs commonly found on docks, patios, or pools. Proudly made by marine fiberglass direct in the usa. You can use this around fresh water or salt water applications.
36″ (H) x 13″ (W) Aluminum Handrail – For 8″ Steps/Stairs – Safety Grab Bar – Dock, Boat, Pool, Hot Tub, etc.
- 36″ aluminum handrail designed for steps. You can use this around fresh water or salt water applications. Proudly made by marine fiberglass direct in the usa. The 8″ cut off on one leg is perfect for stairs commonly found on docks, patios, or pools. This handrail is made by marine fiberglass direct and it uses two 3-1/2″ base plates that will fit on a 2×4 with no overlapping.
30″ (H) x 13″ (W) Aluminum Handrail – For 8″ Steps/Stairs – Safety Grab Bar – Dock, Boat, Pool, Hot Tub, etc.
- Proudly made by marine fiberglass direct in the usa. 30″ aluminum handrail designed for steps. This handrail is made by marine fiberglass direct and it uses two 3-1/2″ base plates that will fit on a 2×4 with no overlapping. The 8″ cut off on one leg is perfect for stairs commonly found on docks, patios, or pools. You can use this around fresh water or salt water applications.
36″ (H) x 13″ (W) Aluminum Handrail w/ Flate Base Plate – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Specs quantity one 36 inch handrail high quality 6063-t5 mill finish aluminum approximate height 36″ +/- 1 ½” diameter tube approximate center-line width 11. It allows safe and easy access to and from a boat or dock, making it perfect for all marinas, private docks, hot tubs, pools, fueling stations and many more places. 5″. Length 14 ½”. This handrail is designed to help with safety. You can use it on your boat, dock, hot tub, pool and anywhere else you want a little extra support. This handrail is made by marine fiberglass direct and it uses a solid aluminum base plate that is ¼” thick. Thickness ¼” thick. You can use stainless screws or stainless bolts for any type of application. This 36″ (h) x 13″ (w) aluminum metal handrail/grab bar is great for all types of outdoor marine applications. Outside rail approximate width 13″. Base solid aluminum base plate width 3 ½”. This handrail is produced by marine fiberglass direct and is proudly made in the usa. You can use it around fresh water or salt water applications.
24" Aluminum Handrail – Safety Grab Bar For Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Proudly made in the usa. You can use this around fresh water or salt water applications. Anchor pads will fit perfectly on a 2×4 on your dock or deck. 24″ aluminum handrail. High quality 6063-t5 mill finish aluminum.
2 (Two) 42″ (H) x 13″ (W) Aluminum Handrails – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- You can use this around fresh water or salt water applications. Two 42″ aluminum handrails. Proudly made by marine fiberglass direct in the usa. Anchor pads will fit perfectly on a 2×4 on your dock or deck. High quality 6063-t5 mill finish aluminum.
8×10 Multi Colors Heavy Duty 10 Mil Tarp Tarpaulin Canopy Tent, Boat. Rv Or Pool Cover
- Tarp is made from extra strength weave and has a heavy duty double laminated coating. Product measures according to finish size and not cut size which is labeled on the package. It is available in assorted thicknesses and colors blue, green and silver. It has a rope reinforced hem and heat sealed seams and grommets every 3 feet. 12 x 14 weave and 8 mil thickness it is sun and fade resistant and rot & rust proof.
Hydro Tools 9235 Soft Top Boat Floating Pool Thermometer And Cord (2-pack)
- Soft top thermometer and cord.
35″ (H) x 13″ (W) Aluminum Handrail – For 8″ Steps/Stairs – Safety Grab Bar – Dock, Boat, Pool, Hot Tub, etc.
- 35″ aluminum handrail designed for steps. This handrail is made by marine fiberglass direct and it uses two 3-1/2″ base plates that will fit on a 2×4 with no overlapping. You can use this around fresh water or salt water applications. The 8″ cut off on one leg is perfect for stairs commonly found on docks, patios, or pools. Proudly made by marine fiberglass direct in the usa.
20′ x 20′ TARP Tarpaulin Canopy Tent Car RV Boat Pool Cover Reinforced 3 Layers
- Other features include, stronger than canvas, yet lighter~~, washable and reusable~~, water mildew & tear resistance~~, rope-reinforced corners & grommets ~~, 18″ distance between grommets~~, rustproof grommets~~, double reinforced corner for greater strength~~, tighter weave pattern for maximum weather protect ~~.
Surf Splash Ii Outdoor Shower – Automatic Foot Shower For Pool, Beach, Rv, Boat & Boots. Automatic, Durable, Safe
- Fully automatic. Specially designed for portability. Requires no electricity and conserves water. Made in usa. Heavy-duty construction.
2 10′ X 16′ Heavy Duty White Tarps Protect Garden Boat Pool Tarpaulin Ate Tools
- Heavy duty. Industrial strength. Specifications 10 mils thick. Double reinforce with plastic corner and grommets approximately every 18 inches for added strength.
35″ (H) x 13″ (W) Aluminum Handrail – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Anchor pads will fit perfectly on a 2×4 on your dock or deck. High quality 6063-t5 mill finish aluminum. 35″ aluminum handrail. Proudly made by marine fiberglass direct in the usa. You can use this around fresh water or salt water applications.
18″ (H) x 13″ (W) Aluminum Handrail w/ Flate Base Plate – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Outside rail approximate width 13″. You can use this around fresh water or salt water applications. You can use stainless screws or stainless bolts for any type of application. 5″. This handrail is made by marine fiberglass direct and it uses a solid aluminum base plate that is ¼” thick. You can use it on your boat, dock, hot tub, pool and anywhere else you want a little extra support. It allows safe and easy access to and from a boat or dock, making it perfect for all marinas, private docks, hot tubs, pools, fueling stations and many more places. Specs quantity one 18 inch handrail high quality 6063-t5 mill finish aluminum approximate height 18″ +/- 1 ½” diameter tube approximate center-line width 11. This 18″ (h) x 13″ (w) aluminum metal handrail/grab bar is great for all types of outdoor marine applications. Base solid aluminum base plate width 3 ½”. This handrail is designed to help with safety. This handrail is produced by marine fiberglass direct and is proudly made in the usa. Thickness ¼” thick. Length 14 ½”.
