Top 25 Best Hadco Lightings in 2019

 

Hadco Lighting Rl4 Large Horizon Pathlyte 12v, Stake Included - The stem is tested for weather- and fade-resistance. The intensity. The rl4 large horizon pathlyte is a low voltage path lighting fixture from hadco lighting, consisting of a powder-coated, extruded aluminium stem and shade, covering a 20 watt bi-pin lamp.

 

Hadco Lighting S3g S3 – 3" Mounting Stake Verde Green - Verde green.

 

Hadco Lighting BPL36-HS7 BPL36S7 12 Volt Non-Metalic Bullyte with Stake Bronze - Fully rotatable shroud, injection molded polyester resin. Safety standards for wet locations. Warranty ten-year limited warranty. Weight 1. 2 lb. Certifications etl listed to u. Electrical assembly double screw terminal socket. Fasteners are 300 series stainless steel. Fully-adjustable swivel arm with vibration-proof locking teeth”½” nps male threads to screw onto accessory mounting stake (included) or junction box (sold separately). Manufactured to iso 90012008 standards. Housing one-piece injection molded polyester resin. Lower wattage lamps are acceptable. S. Lamping 50w maximum par36 screw terminal lamp. Width 5 1/8″ (130mm) length 6 3/8″ (162mm) max. Finish composite is textured, pressure formed, molded-in-color. 12 volt system requires remote transformer, not included. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Cetl listed to canadian safety standards for wet locations. 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105° c, spt-1w wire.

 

Hadco Lighting B3-h B3 Aluminum Bullyte Line Voltage Accent Bronze 100w Par/r30 - 100w par/r30. Bronze.

 

Hadco Lighting BU3-A BU3 Composite Bullyte Line Voltage Accent Black 75W PAR30 - The light assembly is housed in a polymer composite shroud and is capable of complete 360o horizontal and vertical rotation to give complete operational freedom when focusing the lights. Hadco philips is the preferred lighting brand for residential, commercial, landscape and municipal users and the bu3 composite bullyte accent proves why. The bu3 composite bullyte line voltage accent from hadco lighting are accent lights available in verde, black and bronze finishes with a lamp capacity of up to 75 watts. With a length of 241 mm, the bu3 composite allows for ballast to be either in-ground or above ground. Light from the lamp is dispersed through a clear tempered glass placed at an angle of 10o to facilitate easy cleaning. A porcelain base socket ensures electrical insulation and safety, even in wet conditions.

 

Hadco Lighting Bu3-g Bu3 Composite Bullyte Line Voltage Accent Verde Green 75w Par30 - Verde green. 75w par30.

 

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green - Verde green.

 

Hadco Lighting Waml1d Led Floodlyte Low Voltage - Replacement shade for cul2d. Color will age naturally to a fine dark copper patina. Bronze. Natural copper is bright polished, untreated copper color will age naturally to a fine dark copper patina. Shade only, stake and junction box sold seperately.

 

Hadco Lighting CB100AK5812 CB100 Composite Bricklyte Black 12V 2 x 18W 1141 (Lamp Type Included) - The cb100 has die-cast aluminium box with a slight proportion of copper to prevent corrosion and enable it to function even in wet locations. . With a height of 90 mm and depth of 103 mm, the cb100 composite bricklyte can be set into brick and concrete structures and comes in a bronze finish. Hadco from the house of philips brings its over five decade expertise in the lighting industry into play in the cb100 composite bricklyte. Its electronic ballast can start up even in -20o fahrenheit (thataâ’‰”¢s 52o below zero) and the powder coating is durable and suited for concrete and masonry application.

 

Hadco Lighting Rl4-as7 Rl4 Large Horizon Pathlyte 12v Black - With a height of 17 and a quarter inches, the rl4 large horizon pathlyte can be used from the curb or from a detached garage to the entrance, to provide illumination and safety and reduce the risk of stumbling in the dark. The stem is tested for weather- and fade-resistance. The lens is made of spun aluminium and the fixture conforms to all building and regulatory and safety norms. The rl4 large horizon pathlyte is a low voltage path lighting fixture from hadco lighting, consisting of a powder-coated, extruded aluminium stem and shade, covering a 20 watt bi-pin lamp. The intensity of attention to detail and safety can be seen in the fact that even the fasteners are made in stainless steel to withstand the rigors of the outdoors.

 

Hadco Lighting Landscape Light Bun4-As Large Composite Bullyte With Short Shroud Narrow Reflector B - Line voltage, large composite bullyte, fully-rotatable shroud, fully-adjustable swivel arm with vibration-proof locking teeth, lamp type par30/r30 or par38/r40 (not included)socket base bi-pin, width 6 1/4″length 16 1/2″narrow reflector, finish composite black.

 

Hadco Lighting TSS954_15 TSS954-15 – 900W Multitap Transformer 120V - Bronze. Shade only, stake and junction box sold seperately. Natural copper is bright polished, untreated copper color will age naturally to a fine dark copper patina. Color will age naturally to a fine dark copper patina. Replacement shade for cul2d.

 

Hadco Lighting Bl1-hls7 Bl1 Small Aluminum Bullyte Low Voltage With Stake Bronze Long Shroud - Long shroud. Bronze.

 

Hadco Lighting Bi2 Bi2 Cast Iron Junction Box – 40605 Nps 120v Hot Dipped Galvanized Cast Iron Junction Box. 4 - 120v. Hot dipped galvanized cast iron junction box 4″ [102mm] square x 3″ high [76mm] with 1/2″ nps [13mm] top inlet two (2) 3/4″ npt [19mm] bottom inlets used with aluminum or composite fixtures.

 

Hadco Lighting P3_g P3-g Small Horizon Pathlyte Verde 120v 120v - Lamping 75w maximum a19 lamp. 1/2″ nps male threads to screw onto accessory mounting stake or junction box, sold separately. Optical assembly painted, tempered glass jar with clear glass top. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Fasteners are 300 series stainless steel. Safety standards for wet locations. Warranty three-year limited warranty. Manufactured to iso 90012008 standards. Weight 2. Lamp is not included. Stem is extruded aluminum, sold separately. 85 lb. Height 18 1/2″ (470mm) width 6″ (152mm) max. Electrical assembly medium base phenolic socket with nickel-plated screw shell and center contact. Lower wattage lamps are acceptable. Fixture is pre-wired with 18 awg black, white, and ground wires. S. Certifications etl listed to u. Housing die-cast aluminum. Laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications. Cetl listed to canadian safety standards for wet locations.

 

Hadco Lighting Tc354_15 Tc354-15 300w Multitap Painted Transformer 120v - 12, 13, 14, and 15 volt output taps for design flexibility and longer cable run capability. Housing housing is dark gray polyester powder-coat formed steel case with stainless steel screws and lockable captive door, hinged on side. 50/60hz input. The transformer is thermally protected on primary, and secondary side is protected by circuit breaker. Four (4) 1/2″ knockouts for low-voltage exit, on bottom of housing. Manufactured to iso 90012008 standards. Weight 13. Shielded between primary and secondary. Consult factory for details. Line voltage amperage draw 300va = 2. Electrical assembly 6-ft heavy-duty 18-3 awg, 105° c, sjt power cord with 3 prong grounded wall plug. Internal transformer is epoxy encapsulated. Weather-proof compartment for plug-in time clock and photo cell. S. Height 11 3/8″ (289mm) width 6 3/8″ (162mm) depth 5 5/8″ (143mm) max. Cetl listed to canadian safety standards for wet locations. Euro-board terminal block for easy low voltage cable attachment. 1/2″ knockout on one side for hardwiring or accessory mounting. 7 amps. Cable entries should be positioned downward. Certifications etl listed to u. Insulation type transformers for safe operation. Warranty ten-year limited warranty. 16 lb. Safety standards for wet locations. Exterior mounting, transformer should be mounted on the wall, structure, or post in the vertical position. One (1) 1-1/2″ conduit inlet.

 

Hadco Lighting MUL4_GS7 MUL4 Small Mushroom Pathlyte Low Voltage Verde Green - Etl listed to us safety standards for wet locations  cetl listed to canadian safety standards for wet locations  manufactured to iso 90012008 standards. Frosted tempered glass lens. Bronze. 18w maximum s-8 (1141) lamp  lamp is included with fixture  lower wattage lamps are acceptable. Verde green.

 

Hadco Lighting Dsl2 H Square Surface Downlyte With Bracket Low Voltage; Bronze - Bronze. 18w maximum s-8 (1141) lamp  lamp is included with fixture  lower wattage lamps are acceptable. Housing machined aluminum top cap and cast aluminum body with adjustable yoke. Etl listed to us safety standards for wet locations  cetl listed to canadian safety standards for wet locations  manufactured to iso 90012008 standards. Frosted tempered glass lens.

 

Hadco Lighting BU4-H BU4 100W Par38 Composite Bullyte Line Voltage Bronze - Lens is siliconed into shroud. ” Nps male threads to screw onto accessory mounting stake or junction box, sold separately. Warranty ten-year limited warranty. Cetl listed to canadian safety standards for wet locations. Finish composite is textured, pressure formed, molded-in-color. Fully-adjustable swivel arm with vibration-proof locking teeth.  Housing fully rotatable shroud, gasketed, ultem high performance polymer composite. Hid par30 mh or mv acceptable with remote ballast (not included). S. One-piece injection molded ultem high performance polymer composite. Weight 3. 75 lb. 100w maximum mh medium base e17 100w maximum mh medium base par38 lamp is not included. Manufactured to iso 90012008 standards. Ballast must order inground (ibh) or above ground (abh) ballast housing separately. Gasketing is silicone. Safety standards for wet locations. Bu4, shroud optional. Lower wattage lamps are acceptable. Electrical assembly 4kv rated porcelain mini-can base. Certifications etl listed to u. Shroud is optional. Width 6 1/4″ (159mm) length 16 1/2″ (419mm) max. Bun4, buw4, shroud included. Nickel-plated screw shell with center contact. Optical assembly one-piece injection molded ultem high performance polymer with silicone o-ring gasket. Lamping 100w maximum par30/r30 or par38/r40 medium base lamp. Fasteners are 300 series stainless steel.

 

Hadco Lighting Mul4_hs7 Mul4 Small Mushroom Pathlyte Low Voltage Bronze - Bronze.

 

Hadco Lighting Landscape Light Copper Pathlyte Replacement Cul4 Natural Copper Shade Only - Fixture sold seperately shade only 4″ wide. Natural copper is bright polished, untreated copper. Spun solid copper roof with copper stem machined brass threaded adapter for tool-less relamping. Color will age naturally to a fine dark copper patina. ½” Nps male threads to screw onto accessory mounting stake and junction box sold seperately.

 

Hadco Lighting Bu4-a Bu4 100w Par38 Composite Bullyte Line Voltage Black - Fasteners are 300 series stainless steel. Hid par30 mh or mv acceptable with remote ballast (not included). Lamping 100w maximum par30/r30 or par38/r40 medium base lamp. One-piece injection molded ultem high performance polymer composite. Shroud is optional. Fully-adjustable swivel arm with vibration-proof locking teeth. Width 6 1/4″ (159mm) length 16 1/2″ (419mm) max. 100w maximum mh medium base e17 100w maximum mh medium base par38 lamp is not included. Manufactured to iso 90012008 standards. Ballast must order inground (ibh) or above ground (abh) ballast housing separately. Certifications etl listed to u. Bu4, shroud optional. Gasketing is silicone. ” Nps male threads to screw onto accessory mounting stake or junction box, sold separately. S. Bun4, buw4, shroud included. Cetl listed to canadian safety standards for wet locations.  Housing fully rotatable shroud, gasketed, ultem high performance polymer composite. Lower wattage lamps are acceptable. Lens is siliconed into shroud. Optical assembly one-piece injection molded ultem high performance polymer with silicone o-ring gasket. Weight 3. Finish composite is textured, pressure formed, molded-in-color. Electrical assembly 4kv rated porcelain mini-can base. 75 lb. Safety standards for wet locations. Nickel-plated screw shell with center contact. Warranty ten-year limited warranty.

 

Hadco Lighting Rll1-a Rec Louver Steplyte, Black - Optical assembly frosted tempered glass lens. Pigtail of 18-2 awg, 105° c, spt-1w wire. Warranty three-year limited warranty. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Height 2 13/16″ (71mm) width 4 5/8″ (116mm) depth 2 3/4″ (70mm) max. Electrical assembly single contact bayonet (s-8). Lamp is included with fixture. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Lamping 12w maximum s-8 (93) lamp. Housing die-cast aluminum faceplate with galvanized steel, single gang recessed box with stainless steel fasteners. 2 lb. Laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications. Gasketing is diecut neoprene. Certifications manufactured to iso 90012008 standards. Weight 1. 12 volt system requires remote transformer, not included. 12 volt fixture is pre-wired with 6-ft.

 

Hadco Lighting GAHL1-AC GAHL1 Copper Downlyte Low Voltage Accent Copper Finish 12V - Color will age naturally to a fine dark copper patina. Fixture sold seperately shade only 4″ wide. ½” Nps male threads to screw onto accessory mounting stake and junction box sold seperately. Natural copper is bright polished, untreated copper. Spun solid copper roof with copper stem machined brass threaded adapter for tool-less relamping.

 

Hadco Lighting 1010-H Hadco Lighting 1010-H Beacon Bronze,120V 120V - Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation.   Removable roof for easy relamping. Lamping 100w maximum a19 lamp.   Fully gasketed top and bottom. Ballast is factory wired and tested. Check with local authorities before specifying alternate voltages. 13w fluorescent socket is a gx23/gx23-2. Metal halide ballasts are capable of starting at -20° f or -30° c and hps at -40°f or -40°c.   Lower housing may be recessed directly in the ground or in concrete.   Molded silicone gasket seals glass, top and bottom, and prevents moisture intrusion into the fixture.   Fasteners are 300 series stainless steel.   Housing die-cast aluminum. Optical assembly clear borosilicate glass refractor lens. Ballast all hid ballasts are core and coil and regulated with power factors better than 90% (hpf). Hid is 4kv rated medium base porcelain socket with nickel-plated screw shell and center contact.   Beacons are partially recessed. Electrical assembly incandescent is medium base porcelain socket with nickel-plated screw shell and center contact.   Note the base has two (2) ½” npt conduit entrances for connection to the power source. Potting compound must be used to seal the conduit wire entry.   Fluorescent ballast is core and coil, npf class b. Ballasts are factory pre-wired and tested. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Fluorescent ballast is capable of starting at 0° f or -18° c.   Laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications. Installation & mounting voltage caution some local interpretation of the nec section 210-6 only permit the use of 120 volt fixtures when they are mounted below 8′. Note all ballasts are eisa / title 20 / title 24 compliant where applicable.